Skip to main content

Match Book Note Pads


Here is another craft idea using paint swatch samples...a match book note pad. I love little note pads that are small enough to fit in your pocket. I use them all the time for shopping lists because if I do not have a list god only knows what will end up in my shopping bag with my gold fish memory.

What you will need:
  • Paint swatches
  • Paper
  • X-acto™ Knife or Scissors
  • Ruler
  • Stapler
  • Pencil
  • Bone folder or butter knife
  1. Using a bone folder or the wrong side of a butter knife, score along the bottom edge of the top color block on the swatch. Fold the edge.


    ** Scoring a piece adds a notch to the paper that makes it easier to fold. Place the ruler on the fold line and take the bone folder and run it along the length of the fold. If you do not have a bone folder you can use the back side (the un-serrated edge) of a butter knife. Do not press too hard, you do not want to rip or tear the paper.

  2. Using fig. 2 for reference, measure from the fold line to the bottom of the swatch (A). Divide that measurement in half then add .75" inches to that measurement. Using that number (Measurement B), measure from the fold and lightly mark the swatch.
  3. Score the new marked area and fold. If done correctly, the to flat should fall short of reaching all the way to the bottom to allow for the staple.
  4. Next we are going to measure the folded swatch from the vertical position so we can figure out how big the inside paper should be for the pad. Measure the width and subtract .125" (1/8"). Now measure the height, you will subtract between .125" and .25" depending on how thick you want your book. The more pages you add the shorter the height will need to be.

    Note: I made several books ranging from 12 pages to 20 pages. For the 12 page book I only subtracted .125" from the height, however the 20 page note pad required the inside pages to be .25" shorter. You will have to be the judge for what will work best.

  5. Cut a bunch of papers using the measurements from step 4. Double check that they fit in the folded swatch.

  6. When the paper notes pages are in place staple the papers and the small flap together just below the edge of the top flap.


Comments

  1. Thanks for this tutorial and idea!I will try to make one for myself:))

    ReplyDelete
  2. I need to do this! I always have tons of paint chips and paper scrap on hand. good idea!

    ReplyDelete

Post a Comment

Popular posts from this blog

Leather Earring Tutorial

Why should leather only be used for jackets, shoes and purses? Medium weight or upholstery leather is easy to craft since it doesn't fray or crinkle. These leather earrings are quick, versatile and easy to make. You can even recycle those old purses or jackets that have damage since you really only need small amounts of good leather. I used 4" square leather samples and had plenty left over to make more earrings. Supplies: Leather Leather punch (I bought mine at Michaels Craft store for around $10 but you can also get the from home stores like Home Depot or Lowes) Sharp scissors 2-Large Jump Rings 2-Earring wires Jewelry pliers Download the pattern below, print and cut out shapes. Cut 2-of each shape in the leather of your choice. I used 3 different types of leather, don't be afraid to mix it up. Pile one set of the three shapes on top of each other and carefully punch a whole on one of the ends. I punched the hole about a quarter of an inch away from the end using the sma...

Leather Earring Pattern Update

In October I posted a tutorial to make leather earrings . Well for Christmas I revisited this craft and made a few other designs for a few people at my work. This is one of my favorite tutorials because they are so easy to make and the earrings are light and easy to wear. I liked the new designs so much I thought I would share the pattern for them. To view the full set of instructions on how to make these leather earrings, click here . To make one of the two pairs shown, download and print the updated pattern below (the bottom row are the new designs):

Paper Towel Roll Flowers—Tutorial

Puppy puddle? Chips not strong enough to hold the salsa? Drippy pancake batter? I am constantly reaching for paper towels. Inevitably our recycling bin has it’s fair share of craft paper cylinders that make up the core of paper towels and toilet paper rolls. For years my idea of repurposing the tubes was to use them as an amplifier and howl in them, driving my dogs crazy and earning an eye roll from my husband. However, recently I was struck with an idea. The curve of the cardboard would lend itself well to making paper flowers, hence this tutorial was born. Sorry it is a little lengthy… Tools & Materials 1- paper towel roll core Scissors Button Paper glue Page of paper (can be recycled from an old book or magazine) Brown paper shopping bag 28 gauge wire (or wire that you can bend and manipulate that is heavy enough to hold up a paper flower) Wire cutters White craft paint (optional) Small paint brush (optional) Instructions Cut the paper towel roll lengthwise (fig. A). From the cu...