Skip to main content

Charmed Scarf Tutorial


I admit that this is not my original idea. My mom got a charmed scarf for Christmas this year and I loved it. However, it came from out of state and I wasn't about to go on a road trip just to buy a scarf so I did the next best thing and made my own.

Making a charmed scarf is insanely easy and quick to do.

Supplies:
  • 2 yards of light weight jersey material
  • Scissors
  • Jewelry plyers
  • Charms
  • Jewelry rings—I got mine in the bead section at Michael's Crafts. You can see a picture of what I got below. My rings are about 1.25" wide. You want to pick rings out that have approximately a 1" opening. I used used 7 rings on my scarf but you can use more or less depending on personal taste.

  • Jump rings–size depends on the rings that you get. You will want to get jump rings that loop the jewelry rings
  1. Cut a strip of fabric 18" wide by 2 yards long.
  2. Using your jump rings, attach the charms to the jewelry rings.

  3. Thread your jewelry rings with charms onto your scarf.

Told you it was easy!

Labels:

Comments

  1. SonajFebruary 10, 2012 at 2:26 PM

    Ooo, it`s very nice and interesting:2 in 1.I like scarfs and jewelry but all in once is perfect! Thanks for idea!!!:))

    ReplyDelete
  2. SheliaFebruary 23, 2012 at 11:13 AM

    Oh my gosh it is so very easy looking. You can look at anything, and make one just like it. I love this.

    ReplyDelete
  3. RockRushIndiaOctober 14, 2017 at 1:57 AM

    Thanks for sharing this post. Nice jewellery, check out ours.

    ReplyDelete

Post a Comment

Popular posts from this blog

Leather Earring Tutorial

Why should leather only be used for jackets, shoes and purses? Medium weight or upholstery leather is easy to craft since it doesn't fray or crinkle. These leather earrings are quick, versatile and easy to make. You can even recycle those old purses or jackets that have damage since you really only need small amounts of good leather. I used 4" square leather samples and had plenty left over to make more earrings. Supplies: Leather Leather punch (I bought mine at Michaels Craft store for around $10 but you can also get the from home stores like Home Depot or Lowes) Sharp scissors 2-Large Jump Rings 2-Earring wires Jewelry pliers Download the pattern below, print and cut out shapes. Cut 2-of each shape in the leather of your choice. I used 3 different types of leather, don't be afraid to mix it up. Pile one set of the three shapes on top of each other and carefully punch a whole on one of the ends. I punched the hole about a quarter of an inch away from the end using the sma...
95 comments
Read more

Leather Earring Pattern Update

In October I posted a tutorial to make leather earrings . Well for Christmas I revisited this craft and made a few other designs for a few people at my work. This is one of my favorite tutorials because they are so easy to make and the earrings are light and easy to wear. I liked the new designs so much I thought I would share the pattern for them. To view the full set of instructions on how to make these leather earrings, click here . To make one of the two pairs shown, download and print the updated pattern below (the bottom row are the new designs):
30 comments
Read more

Washer Necklace Tutorial

Every time I buy furniture that requires assembly I always left over hardware. I take this hardware and put it in a jar thinking that one day I will need that extra nut or bolt. Well today is that day! Below is a tutorial on how to take those extra washers and make them into a cute necklace. Supplies: Scissors X-acto knife or hole punch Pencil Small piece of scrapbooking paper (you can use the left over scraps for this project) Modge Podge (or something similar) Washer Aleene’s Paper Glaze 36” of ribbon or cord Use the washer to trace a circle on the paper, don’t forget to trace the inside circle as well. Using your scissors cut just inside of the traced line on the outer circle. Note: you want to cut inside of the line and not on it so it fits on the washer and does not overlap the edges. If the hole for your center is close to the same size of a hole punch, simply punch out the center circle. If not use the X-acto knife to cut out the center area. Modge Podge the paper to the washer ...
11 comments
Read more