Skip to main content

Repurposed Plastic Bangle




Recently I got a stash of my grandmom's old plastic bangles that she originally got from the 5 and 10 store. Although I love bangles the years had put a bunch of nicks and dings on them so I decided to give them an facelift. This project is super easy and cheap. One of the best parts is that you can not only use old bangles you can use all those bits and pieces of embroidery floss that you have left over from other projects.
 
Supplies
2-skeins of embroidery floss*
plastic bangle
scissors
white craft glue

*You can use more than 2 colors, I encourage using as many as you want.


  1. Tie embroidery floss to the bracelet. Make sure to double not it so it doesn't slip off.


  2.  Wrap the embroidery floss around the bracelet making sure to cover the short tail by wrapping the embroidery floss over it.


  3.  To change colors tie one color of floss to the other. Make sure to double knot it tightly so the knot doesn't slip (3A). Closely trim the tails of the floss making sure to keep the one long strand attached to the skein.


  4. Continue wrapping the bracelet until it is entirely covered.


  5. When you get to the end, tie a double knot to secure the floss (5A). Place a dab of white glue on top of the knot (5B) then using your finger tip lightly work the glue into the knot. Let the glue dry thoroughly. Check to make sure the knot is secure, you may want to apply more glue if not. After the glue is dry and the knot is secure trim the tail of the floss.




Labels:

Comments

  1. SonajJune 15, 2012 at 5:55 PM

    It`s wonderfull idea and look!I have to make one like this for myself!Thanks for idea!:)

    ReplyDelete
  2. Sara, Heavens to BessieJune 17, 2012 at 10:44 AM

    Love these!!! Thanks for the how to :-)

    ReplyDelete

Post a Comment

Popular posts from this blog

Leather Earring Tutorial

Why should leather only be used for jackets, shoes and purses? Medium weight or upholstery leather is easy to craft since it doesn't fray or crinkle. These leather earrings are quick, versatile and easy to make. You can even recycle those old purses or jackets that have damage since you really only need small amounts of good leather. I used 4" square leather samples and had plenty left over to make more earrings. Supplies: Leather Leather punch (I bought mine at Michaels Craft store for around $10 but you can also get the from home stores like Home Depot or Lowes) Sharp scissors 2-Large Jump Rings 2-Earring wires Jewelry pliers Download the pattern below, print and cut out shapes. Cut 2-of each shape in the leather of your choice. I used 3 different types of leather, don't be afraid to mix it up. Pile one set of the three shapes on top of each other and carefully punch a whole on one of the ends. I punched the hole about a quarter of an inch away from the end using the sma
88 comments
Read more

Leather Earring Pattern Update

In October I posted a tutorial to make leather earrings . Well for Christmas I revisited this craft and made a few other designs for a few people at my work. This is one of my favorite tutorials because they are so easy to make and the earrings are light and easy to wear. I liked the new designs so much I thought I would share the pattern for them. To view the full set of instructions on how to make these leather earrings, click here . To make one of the two pairs shown, download and print the updated pattern below (the bottom row are the new designs):
21 comments
Read more

Washer Necklace Tutorial

Every time I buy furniture that requires assembly I always left over hardware. I take this hardware and put it in a jar thinking that one day I will need that extra nut or bolt. Well today is that day! Below is a tutorial on how to take those extra washers and make them into a cute necklace. Supplies: Scissors X-acto knife or hole punch Pencil Small piece of scrapbooking paper (you can use the left over scraps for this project) Modge Podge (or something similar) Washer Aleene’s Paper Glaze 36” of ribbon or cord Use the washer to trace a circle on the paper, don’t forget to trace the inside circle as well. Using your scissors cut just inside of the traced line on the outer circle. Note: you want to cut inside of the line and not on it so it fits on the washer and does not overlap the edges. If the hole for your center is close to the same size of a hole punch, simply punch out the center circle. If not use the X-acto knife to cut out the center area. Modge Podge the paper to the washer
10 comments
Read more