Skip to main content

Chiffon & Tulle No Sew Flower



And the obsession with flowers continues. I don't understand I was such a tom boy as a child and now all I think about are flouncy, flirty, girly, fabric flowers. I blame it on the time a brick was dropped on my head and my mom thought it was hysterical...from tom boy to tutus!

Anyway here is another no sew flower. However, this one is a bit trickier because of the light weight of the fabric and the hot glue. So BE CAREFUL not to burn yourself, it if very easy. No one wants hot glue gun burned fingers!

Supplies:
Hot glue gun
Butter Knife (I used a plastic one so I didn't ruin a good one)
Small piece of felt
Chiffon (about an eighth to a quarter of a yard)
Tulle (about an eight of a yard)
Medium to large sized decorative shank button


  1. Print out the pattern below. (Use the scale to make sure the print out is the correct size). Out of the felt cut one 2.5"circle. Using the square, cut 30 pieces of chiffon and 10 pieces of tulle.

  2. Take a square of the chiffon and fold it in half but make sure it is off center (A). Then take that half and fold it in half again (B). 


  3. Place a dab of hot glue near the edge of the circle and place the corner of the folder petal on the glue. Using the butter knife, push down the fabric and hold it in place til it dries. Note: the knife might stick a little but the smooth surface should be easily removed from the glue leaving the petal attached to the felt backer.

  4. Repeat steps 2 and 3 using the chiffon to fill all around the edge of the backer. Don't be afraid to pack them in, you can always cut more fabric! After the edge is covered, repeat steps 2 and 3 using the rest of the fabric going around in circles until the felt backer is covered. To make my flower I used one circle layer of tulle right after the first outer circle. Then I continued with the chiffon to finish it up.


  5. Put hot glue on the back of the shank button and glue it to the center of the flower. Hold in place til the glue cools/dries.
 

Note: I did not make this flower into an accessory, however it would be great on a headband, as a hair clip or a pin. For ideas on different things to do with the flower refer to some of my other tutorials (headband, brooch, hair clips.

Comments

  1. Thank you, I love this! I wonder the same thing as you, I was such a tom boy growing up, the thought of hanging out with girls was kind of boring...now I enjoy work that involves encouraging and empowering women!

    Aloha, Connie

    ReplyDelete
  2. Thank you for this wonderful tutorial!♥ Your detailed instructions, diagrams, and photos are incredibly helpful--and you even provided a template, too! Oh, and the flower is gorgeous... I can't wait to make one!

    I found your tut through Fabric Bows and More; I'm looking forward to browsing your blog!: )

    xoxo

    ReplyDelete
  3. This is beautiful! It will be perfect on a friend who is getting married soon.

    ReplyDelete

Post a Comment

Popular posts from this blog

Leather Earring Tutorial

Why should leather only be used for jackets, shoes and purses? Medium weight or upholstery leather is easy to craft since it doesn't fray or crinkle. These leather earrings are quick, versatile and easy to make. You can even recycle those old purses or jackets that have damage since you really only need small amounts of good leather. I used 4" square leather samples and had plenty left over to make more earrings. Supplies: Leather Leather punch (I bought mine at Michaels Craft store for around $10 but you can also get the from home stores like Home Depot or Lowes) Sharp scissors 2-Large Jump Rings 2-Earring wires Jewelry pliers Download the pattern below, print and cut out shapes. Cut 2-of each shape in the leather of your choice. I used 3 different types of leather, don't be afraid to mix it up. Pile one set of the three shapes on top of each other and carefully punch a whole on one of the ends. I punched the hole about a quarter of an inch away from the end using the sma

Leather Earring Pattern Update

In October I posted a tutorial to make leather earrings . Well for Christmas I revisited this craft and made a few other designs for a few people at my work. This is one of my favorite tutorials because they are so easy to make and the earrings are light and easy to wear. I liked the new designs so much I thought I would share the pattern for them. To view the full set of instructions on how to make these leather earrings, click here . To make one of the two pairs shown, download and print the updated pattern below (the bottom row are the new designs):

Washer Necklace Tutorial

Every time I buy furniture that requires assembly I always left over hardware. I take this hardware and put it in a jar thinking that one day I will need that extra nut or bolt. Well today is that day! Below is a tutorial on how to take those extra washers and make them into a cute necklace. Supplies: Scissors X-acto knife or hole punch Pencil Small piece of scrapbooking paper (you can use the left over scraps for this project) Modge Podge (or something similar) Washer Aleene’s Paper Glaze 36” of ribbon or cord Use the washer to trace a circle on the paper, don’t forget to trace the inside circle as well. Using your scissors cut just inside of the traced line on the outer circle. Note: you want to cut inside of the line and not on it so it fits on the washer and does not overlap the edges. If the hole for your center is close to the same size of a hole punch, simply punch out the center circle. If not use the X-acto knife to cut out the center area. Modge Podge the paper to the washer